Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
- 9. Brake system
9.1. Specifications
9.2. System of anti-blocking of brakes (ABS)
9.3. Brake shoes of forward brakes
9.4. Support of forward brakes
9.5. Brake shoes of back disk brakes
9.6. Support of back disk brakes
9.7. Brake disk
9.8. Brake shoes of back drum-type brakes
9.9. Working cylinder
9.10. Main cylinder of brake system
9.11. Brake hoses and tubes
9.12. Hydraulic system of brakes
9.13. Vacuum amplifier
9.14. Hand brake
9.15. Ropes of the hand brake
9.16. Brake pedal
9.17. Switch of headlights of a stoplight
9.18. The valve of restriction of the pressure, sensitive to car loading
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment
|
Elements of a support of back disk brakes
|
1. Bolt
2. Plug
3. Holder of blocks
4. Brake disk
5. Bolt cover
6. Plug
7. Rasproka of the hand brake
8. Regulirovochna bolt
9. Limiter of a course of an adjusting bolt
10. Mainspring emphasis
11. Mainspring fastening
12. Fixing ring
13. Cylinder cover
14. Piston
15. Piston consolidation
16. Cutting lock ring
17. Mainspring
18. Sealing ring
19. Dustproof cover
20. Cover of the cranked lever of the hand brake
|
21. Fixing plate of a brake shoe
22. Brake shoe
23. Antinoise laying
24. Fixing plate of a brake shoe
25. A brake shoe (with the wear indicator)
26. Antinoise laying
27. Torsionny spring
28. Cranked lever of the hand brake
29. Needle bearing
30. Fixing arm of a rope of the hand brake
31. Valve of production of air
32. Brake support
33. Rope of the hand brake
34. Check
35. Clip
36. Pin
37. Laying |
Prevention
The dust formed as a result of wear of brake shoes, contains the asbestos which is hazardous to health. Do not blow off it by means of the compressed air and do not inhale.
It is forbidden to use solvents on the basis of gasoline for cleaning of the mechanism of brakes. Use only a special cleaner for the mechanism of brakes.
If it is necessary to carry out a support partition (usually because of leakage of brake liquid) previously learn the price of spare parts or cost of already vosstavlenny or new support. Before the beginning of a partition get a repair set. Always repair both supports together – never repair only one of them.
Removal
| PERFORMANCE ORDER |
| 1. Turn off nuts of fastening of wheels, lift a back part of the car and establish it on support. Remove a wheel. |
|
|
2. Turn off a bolt and disconnect a brake hose from a support. Close a hose opening by means of a piece of a rubber hose of suitable diameter for prevention of hit of dirt and moisture in brake system, and also for reduction of losses of brake liquid. |
| 3. Disconnect a rope of the hand brake from a support, having got the check and a pin, thus press on the cranked lever of the hand brake. Remove a fixing clip of a braid of a rope and remove a rope. |
| 4. Remove a support, being guided by the instructions provided in subsection 9.3 (removal of a support is a part of operation on replacement of brake shoes). |
|
Partition
| PERFORMANCE ORDER |
| 1. For a partition of a support squeeze out plugs from ears of a support and remove dustproof covers and covers of bolts from both parties of a support. |
| 2. By means of a screw-driver remove a fixing ring of a cover of the cylinder and a cover. |
| 3. By means of flat-nose pliers with thin sponges which are necessary for inserting into flutes on a piston surface, turn the piston counter-clockwise and get it from a support. |
| 4. Examine a surface of the piston and walls of the cylinder of a support. If they are scratched, on them is watch corrosion or wear, replace a support together with the piston. |
| 5. If these elements in a good condition, remove piston consolidation from the support cylinder by means of the wooden or plastic tool. Metal tools can damage a cylinder surface. |
| 6. The partition of the hand brake and elements of the self-regulating mechanism is not recommended, as existence of special tools and many spare parts for this purpose is necessary are not on sale separately. Check operation of the adjusting mechanism, having pressed the cranked lever of the hand brake a hand, and, having checked, that the adjusting bolt moved evenly. If any of elements of the adjusting mechanism it is faulty, replace a support. |
| 7. Clear all elements by means of cleaning liquid for the mechanism of brakes. |
| 8. For assembly of a support it is necessary to get a repair kit. |
| 9. Omit new consolidation of the piston in brake liquid and establish it in the support cylinder. |
| 10. Lower the new piston in brake liquid and establish it on an adjusting bolt in the support cylinder. By means of flat-nose pliers with thin sponges which are necessary for inserting into lock flutes of the piston, turn the piston clockwise until it will not begin to rotate freely, then combine lock flutes with a ledge on a support. |
| Establish a new dustproof cover of the piston and a fixing ring. |
| Grease plugs with silicone greasing (it should be included in a repair kit) and establish them in support ears. Establish dustproof covers and covers of bolts. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation of a support is carried out upside-down removals. Do not forget to replace copper sealing washers (laying) on connection of a brake hose (new washers are usually included in a repair set). |
| 2. Pump over a contour of brake system, being guided by instructions (see subsection 9.12). Check, that connections of brake hoses did not proceed. Check work of brakes before the beginning of normal operation of the car. |
|
|
|