Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
- 12. Electric equipment
   12.1. Safety locks
   12.2. Burned-through crossing points
   12.3. Automatic switches
   12.4. Relay
   12.5. Breakers of indexes of turns / alarm system
   12.6. The combined switch
   12.7. The switches established on a steering column
   12.8. Lock of ignition and lock drum
   12.9. Switch of a heater of back glass
   12.10. Heater of back glass
   12.11. Radio receiver and loudspeakers
   12.12. Aerial
   12.13. Bulbs of headlights of head light
   12.14. Headlights of head light
   12.15. Replacement of bulbs
   12.16. System of day inclusion of headlights
   12.17. Engine of screen wipers
   12.18. Instrument guard
   12.19. Sound signal
   12.20. System cruise control
   12.21. System of the central lock
   12.22. System of window regulators
   12.23. Rear-view mirrors with the electric drive
   12.24. Safety airbag
   + 12.25. Electroschemes



12.20. System cruise control

GENERAL INFORMATION

Arrangement of elements of system cruise control

1. Ignition lock
2. System switch cruise control
3. Block of safety locks of N1 (safety lock of the electronic control unit)
4. The switch on a coupling pedal
5. Switch of headlights of a stoplight
6. Elektoronny control unit
7. The switch on the hand brake
8. Drive
9. Sensor of speed
10. The switch blocking inclusion of a starter by included transfer

The system cruise control (if it is established) supports constant speed of the car by means of the electronic control unit (computer) established in salon and a drive, located near the accumulator in an impellent compartment. The drive is connected to the connecting mechanism of a butterfly valve by rope or draft means. Besides a drive, the system turns on the switch of brakes, the coupling switch, operating switches, the relay or connecting wires.

For check of some of functions of this system use of the special equipment and carrying out special diagnostic operations which are inaccessible to the simple motorist is necessary.

Below the description of the general operations on system check cruise control which can help with detection of sources of malfunction is given.

Check

PERFORMANCE ORDER
1. Check a safety lock (see subsection 12.1).
2. Ask the assistant to press a brake pedal, and check their work and system work. Turning on of the switch of headlights of a stoplight and if it is established, the switch on a coupling pedal, деактивирует system cruise control.
3. If headlights of a stoplight do not light up or will not go out, eliminate malfunction, and again check system cruise control. Check the switch on a coupling pedal (see subsection 8.2.6).
4. Examine a vacuum hose (if it is established), connected to the servo-driver, and also check the connecting mechanism between the system servo-driver cruise of control and a butterfly valve, and replace if it is necessary.
5. Systems cruise control use many various devices for determination of speed of the car. On these models the sensor of speed is located in a transmission. Turn off a bolt and get the sensor (see subsection 7.2.3), scroll its castor and check sensor signals by means of the digital voltmeter at its rotation. If resistance does not change at sensor rotation, it means is faulty.
6. Pass on the car for system check cruise control. If it does not work, address to experts for further diagnostics and repair.