Toyota Corolla

1992-1998 of release

Repair and car operation

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmissions
   - 7.1. Mechanical transmission
      7.1.1. Specifications
      7.1.2. Being switched ropes
      7.1.3. Gear shifting lever
      7.1.4. Switch of headlights of a backing
      7.1.5. Removal and transmission installation
      7.1.6. Transmission partition
   + 7.2. Automatic transmission
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

7.1.2. Being switched ropes

GENERAL INFORMATION

Switching ropes and the unit of the lever of gear shifting (model of release of 1993-1995)

1. N2 plug fastening п
ereklyuchayushchy rope
2. N2 plug
3. N1 plug
4. Fastening of the N1 plug of a switching rope

5. Fixing arm of the console
6, 7. A switching rope
8. Lever unit gear shiftings (Type A)
9. Fixing arm
10. Lever unit gear shiftings (Type B)

Switching ropes and the unit of the lever of gear shifting (model of release of c of 1996)

1. Unit of the lever of an adventure of transfers
2. Fixing arm of N1 of the console of the lever of gear shifting
3. Check
4. Washer
5. Unit of the lever of an adventure of transfers
6. Fixing arm of N1 of the console of the lever of gear shifting
7. A switching rope
8. Clip

9. Check
10. Washer
11. Check
12. Washers
13. Clip
14. Fastening
15. Plugs
16. Fastenings of ropes
17. A switching rope
18. Clip

Removal and installation

PERFORMANCE ORDER

	1. In an impellent compartment remove checks and washers (are specified by shooters) and disconnect ropes from the cranked lever of gear shifting.
	2. Remove fastenings of ropes from an arm (are specified by shooters) by means of flat-nose pliers.
3. In salon remove the console of the lever of gear shifting (see subsection 11.24).
4. Remove fastenings of ropes from the bottom party of the unit of the lever of gear shifting (see fig. Switching ropes and the unit of the lever of gear shifting (model of release of 1993-1995 of g) or fig. Switching ropes and the unit of the lever of gear shifting (model of release of c of 1996)).
	5. Remove checks and washers from the ends of ropes (it is specified by an arrow) and disconnect ropes from the gear shifting lever.
6. Walk along ropes to a partition of a body and remove pressurizing plugs. Stretch ropes through a partition.
7. Installation is carried out upside-down removals.